Kriega KOSBA-H OS-Base Dry Bags Straps For Husqvarna Norden 901 (2021-)

Kriega’s KOSBA-H OS-BASE Dry Bags Straps are made specifically for Husqvarna Norden 901 (2021-current).

Designed to be a perfect fit on the Husqvarna Norden 901 with a custom shape and specific fitting hardware. The OS-BASE 901 is an ‘over the seat harness’ for mounting , , or  ADVENTURE PACKS as soft panniers, with no need for metal frames. This system provides a super-tough, lightweight carrying solution, with no drilling or permanent bodywork alterations needed. The fitting hardware gives the flexibility to mount a one, two, or three-pack set-up, depending on your ride. The set-length straps make mounting quick and easy, and the custom shape provides a tight, secure fit with plenty of distance from the exhaust. Less than a minute to mount and just seconds to remove it.

• Loop the lower straps through the rear foot peg mounts
• Loop the top straps around the rear rack Alloy Spacers
• Tighten the top straps and the OS-BASE is firmly mounted on the seat

• Carrying capacity from 12 to 54 Liters with centre pack mounting option.
• Heavy-duty Hypalon construction.
• Quick & easy to put on/take off.
• Reinforced stitching on all stress points.
• Aircraft grade alloy hooks.
• Non-slip cam buckles.
• Includes pre-cut paintwork protection film.
• 10 Year Guarantee
• Weight – OS-Base + Fitting Kit  1150g / 2.5lb

• Alloy spacers x 4
• M8 x 55mm bolts x 4
• 50mm bolt-on loops x 2
• 80mm bolt-on loops x 2
• M6 20mm washers x 10
• M6 x 30mm torx bolts x 2
• M6 x 16mm torx bolts x 2
• Clear protective film x 4

Before you can fit the OS-BASE to the bike you will need to make some minor adjustments to the bike hardware. Remove the 4 bolts holding the Norden baggage carrier and passenger grips. Detach the passenger grips and replace with the 4 x alloy spacers and 55mm M8 bolts included. This will raise the height of the baggage carrier to improve access for fitting the OS-BASE straps.